弹性全模突风动载荷风洞试验技术研究
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

V211.7

基金项目:

国家自然科学基金资助项目(11972296);工信部民机专项(MJ-2017-F-08)


Study on gust wind tunnel test for a full elastic aircraft model
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    目前,欧美等世界主要航空大国已经具备较为成熟的突风风洞试验技术,但中国突风风洞试验技术相对落 后,特别是缺少大型风洞全机级突风试验装置和相关技术。本文研制了突风发生器、五自由度支撑系统和全机弹性 模型,并进行了全机模型突风动载荷风洞试验验证。试验结果表明:突风流场稳定,叶片两端与风洞中心位置突风 速度偏差小于25%;全机支撑系统支持刚度小而稳定性好,能够满足突风动载荷试验模型悬挂要求;采用非均匀突 风场仿真计算结果与风洞试验实测结果接近,翼根弯矩误差小于15%,翼尖过载绝对值误差小于0.2g。

    Abstract:

    At present, the big aviation countries already have mature gust wind tunnel test technology, but which is relatively back? ward in China, especially the gust wind tunnel tests equipment and technology of full aircraft model are lack. In this paper, a gust generator, a five-degree-of-freedom suspension system and a full elastic aircraft model are developed, and the wind tunnel tests of the whole model are carried out. The test results show that the gust field is stable, and the deviation of the gust velocity between the two ends and the center of the wind tunnel is less than 25%. The support stiffness of the model suspension system is small and the stability is good, which can meet the requirements of the gust wind tunnel test. The simulation results of the non-uniform gust field are close to those of the wind tunnel test, and the error of the moment of the wing root is less than 15%, and the error of wing tip overload is less than 0.2g.

    参考文献
    相似文献
    引证文献
引用本文

赵冬强,杨智春,于金革,曾宪昂,黄国宁.弹性全模突风动载荷风洞试验技术研究[J].振动工程学报,2024,37(10):1775~1782.[ZHAO Dong-qiang, YANG Zhi-chun, YU Jin-ge, ZENG Xian-ang, HUANG Guo-ning. Study on gust wind tunnel test for a full elastic aircraft model[J]. Journal of Vibration Engineering,2024,37(10):1775~1782.]

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-10-25
  • 出版日期:
文章二维码
您是第位访问者
振动工程学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司